mercoledì 19 marzo 2014

Work in progress - Sherman II -

Ho ultimato la pittura dei cingoli spruzzando con l'aerografo , sulle parti in acciaio , XF68 miscelato al 50% con X10 . Allo stesso ho aggiunto il diluente X20A per rendere il colore più liquido . Dopo circa 24 ore ho ripassato il metallo con il pigmento Mig P031 (Vietnam Earth) per simulare la ruggine , le parti gommate sono state trattate allo stesso modo ma con il pigmento Mig P037 ( Gulf War Sand) . Ho eseguito poi il montaggio dei cingoli sul carro . A questo punto ho fatto una miscela di XF55 ( 10%) X22 (20%) diluente X20A (70%) e dopo aver montato lo scafo superiore e la torretta ho spruzzato questo colore molto diluito e poco coprente sui fianchi , sul fronte e sul retro del carro , il risultato è nelle foto.

I finished the painting of the tracks by spraying with an airbrush, the steel parts, XF68 mixed with 50% with X10. Likewise I added the X20A thinner to make the color more liquid. After about 24 hours I rehearsed the metal with Mig pigment  P031 (Vietnam Earth) to simulate rust, rubber parts have been treated the same way but with Mig pigment P037 (Gulf War Sand). I then run the installation of the tracks on the tank. At this point I made a mixture of XF55 (10%) X22 (20%) thinner X20A (70%) and after fitting the upper hull and turret I sprayed this color very diluted and short covering on the sides, front and back of the tank, the result is in the pictures.